User's Manual

C HAPTER 11 | Access Control Settings
Host
– 93 –
■
Click Save to complete the settings.
Then you will go back to the Access Control Rule Management page and
see the following list.
Figure 74: Display Access Control Entry
HOST
Choose menu “Access Control->Host”, you can view and set a Host list in
the following screen. The host list is necessary for the Access Control Rule.
Figure 75: Host Settings
◆ Host Description - Here displays the description of the host and this
description is unique.
◆ Information - Here displays the information about the host. It can be
IP or MAC.
◆ Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New button.
2. In the Mode field, select IP Address or MAC Address.
■
If you select IP Address, the screen shown is Figure 75.
1) In Host Description field, create a unique description for the host
(e.g. Host_1).
2) In LAN IP Address field, enter the IP address.
■
If you select MAC Address, the screen shown is Figure 76.
1) In Host Description field, create a unique description for the host
(e.g. Host_1).