User's Manual

– 90 –
11 ACCESS CONTROL SETTINGS
There are five submenus under the Access Control menu: Rule, Host,
Target, Schedule and Parental Control. Click any of them, and you will be
able to configure the corresponding function.
RULE
Choose menu “Access Control->Rule”, you can view and set Access Control
rules in the screen as shown in the following.
Figure 72: Access Control Rule Management
◆ Enable Internet Access Control - Select the check box to enable the
Internet Access Control function, so the Default Filter Policy can take
effect.
◆ Rule Name - Here displays the name of the rule and this name is
unique.
◆ Host - Here displays the host selected in the corresponding rule.
◆ Target - Here displays the target selected in the corresponding rule.
◆ Schedule - Here displays the schedule selected in the corresponding
rule.
◆ Action - Here displays the action the Router takes to deal with the
packets. It could be Allow or Deny. Allow means that the Router permits
the packets to go through the Router. Deny means that the Router
rejects the packets to go through the Router.