User's Manual

– 72 –
7 DHCP SETTINGS
There are three submenus under the DHCP menu: DHCP Settings, DHCP
Clients List and Address Reservation. Click any of them, and you will be
able to configure the corresponding function.
DHCP SETTINGS
Choose menu “DHCP->DHCP Settings”, you can configure the DHCP Server
on the page. The Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for
all the PC(s) that are connected to the Router on the LAN.
Figure 56: DHCP Settings
◆ DHCP Server - Enable or Disable the DHCP server. If you disable the
Server, you must have another DHCP server within your network or else
you must configure the computer manually.
◆ Start IP Address - Specify an IP address for the DHCP Server to start
with when assigning IP addresses. 192.168.2.100 is the default start
address.
◆ End IP Address - Specify an IP address for the DHCP Server to end
with when assigning IP addresses. 192.168.2.199 is the default end
address.