User's Manual

SMCWEB-N2 Wireless N Universal Repeater User Manual
- 88 -
 Service Name: Select a service type.
 Service IP Address: Enter the IP address of the computer that provides
services.
Click the Add Custom Service button and the Ports - Custom Service page is
displayed:
 Service Name: Select a service type.
 Protocol: The protocol used at the mapping port. You can select TCP/UDP,
TCP, or UDP. It is recommended to use TCP/UDP if you do not know which
protocol should be used.
 Starting Port: After the connection to the mapping port is established, the
corresponding port is open and the application can initiate subsequent
connection requests to the open port.
 Ending Port: Set the end port of the mapping port range.
 Service IP Address: Enter the IP address of the computer that provides
services.
After finishing settings, click Apply to save the settings.