User's Manual

SMCWEB-N2 Wireless N Universal Repeater User Manual
- 63 -
8.1.2 Clients List
Choose Running Status > Clients List and the Clients List page is displayed.
This page displays information of computers connected to SMCWEB-N2, including
the IP adress and MAC address of each computer.
8.2 Setup Wizard
For settings, refer to section 6.2 “Router Mode Configuration”.
8.3 Mode Setting
Click Mode Settings and the Mode Settings page is displayed.
 Bridge Mode: The interface on its case is an LAN interface. Users can
connect SMCWEB-N2 and the PC using an RJ45 cable or a wireless
network card.
 Router Mode: Computers can connect to SMCWEB-N2 in a wireless way
only.