User's Manual

SMCWEB-N2 Wireless N Universal Repeater User Manual
- 62 -
In this page, you can view performance statistics information of SMCWEB-N2,
including the numbers of sent and received packets at each port.
 Set Interval: Set the interval for traffic statistics.
 Stop: If you click this button, this page always displays statistics information
that was refreshed for the last time and it is not refreshed any more.
Click Connection Status in the Router Status page, and the Connection Status
page is displayed. This page displays current connection information of
SMCWEB-N2.
The following takes WAN connection of DHCP as an example.
 Release: Click the button and SMCWEB-N2 sends a request to the ISP for
releasing the IP address, the subnet mask, the default gateway, and DNS
server settings.
 Renew: Click the button and SMCWEB-N2 dynamically obtains an IP
address, a subnet mask, the default gateway, and DNS server settings from
the ISP. The information will be displayed in this page.
For details of WAN connection modes, refer to section 8.4.2 “WAN Interface
Settings”.