User's Manual

SMCWEB-N2 Wireless N Universal Repeater User Manual
- 34 -
Step 5 SMCWEB-N2 provides the wireless roaming function if you select
Synchronize Wireless Universal Repeater's And Uplink AP's SSID
And Security Options. Otherwise, manually configure the SSID and
security options for the repeater. Click Finish to complete setup wizard.
6.4 WDS Mode Configuration
6.4.1 Repeater Configuration in the WDS Mode
Step 1 Set the three-way switch on the side panel to Repeater after
SMCWEB-N2 is powered on. Log in to the configuration page after the
system is started.
Step 2 Click Setup Wizard in the navigation bar on the left pane of the page.
Select WDS Mode and click Next. (Note: The WDS function cannot be
used if the channel is set to Auto) Manually set all WDS devices to the
same channel.