User's Manual

SMCWEB-N2 Wireless N Universal Repeater User Manual
- 120 -
 Erase
Under some circumstances (for example, if you move the router to a different
network or if you have forgotten the password) you might want to erase the
configuration and restore the factory default settings.
Click Erase to restore the factory default settings of the router. This operation has
the same effect as pressing the Reset button on the side panel for 3-6 seconds.
9.6.2 Reboot Router
Choose Management Function > Reboot Router and the Reboot Router page is
displayed.
Click Reboot to reboot the router. After the router is rebooted, the system jumps to
the login page.
9.6.3 Set Password
Choose Management Function > Set Password and the Set Password page is
displayed.
In this page, you can change the password of the administrator and set the page
timeout time.