User's Manual

C HAPTER 4 | Configuring the Router
Access Control
– 94 –
For example: If you desire to restrict the internet activities of host with
MAC address 00-11-22-33-44-AA, you should first follow the settings
below:
1. Click “Add New” button in Figure 79 to enter the “Add or Modify a Host
Entry” page.
2. In Mode field, select MAC Address from the drop-down list.
3. In Host Description field, create a unique description for the host (e.g.
Host_1).
4. In MAC Address field, enter 00-11-22-33-44-AA.
5. Click Save to complete the settings.
Then you will go back to the Host Settings page and see the following list.
TARGET Select Access Control -> Target from the menu; you can view and set a
Target list in the screen, as shown in Figure 82. The target list is necessary
for Access Control Rules.
Figure 82: Target Settings
◆ Target Description - Here displays the description about the target
and this description is unique.
◆ Information - The target can be IP address, port, or domain name.
◆ Modify - To modify or delete an existing entry.
To add a new entry, follow the steps below.
1. Click the “Add New” button.
2. In Mode field, select IP Address or Domain Name.
a. If you select IP Address, the screen in Figure 83 is shown.
●
In Target Description field, create a unique description for the
target (e.g. Target_1).