User's Manual

HAPTER

| Configuring the Router

Forwarding

– 76 –

5. Click the Delete All button to delete all entries.

6. Click the Next button to go to the next page and click the Previous

button to return the previous page.

FORWARDING

There are four submenus under the Forwarding Application menu (shown

in Figure 61): Virtual Servers, Port Triggering, DMZ, and UPnP. Click

any of them and you will be able to configure the corresponding function.

Figure 61: The Forwarding Menu

VIRTUAL SERVERS Select Forwarding->Virtual Servers from the menu; you can view and

add virtual servers in the next screen (as shown in Figure 62). Virtual

servers can be used for setting up public services on your LAN, such as

DNS, Email and FTP. A virtual server is defined as a service port, and all

requests from the Internet to this service port will be redirected to the

computer specified by the server IP. Any PC that was used for a virtual

server must have a static or reserved IP Address because its IP Address

may be changed when using the DHCP function.

Figure 62: Virtual Servers

◆ Service Port - The number of an external port. You can type a service

port or a range of service ports (in XXX – YYY format, XXX is the start

port number, YYY is the end port number).

◆ IP Address - The IP Address of the PC providing the service

application.

◆ Protocol - The protocol used for this application, either TCP, UDP, or All

(all protocols supported by the Router).