User's Manual

HAPTER

| Configuring the Router

Wireless

– 67 –

Figure 49: WPA/WPA2

■

Radius Server IP - Enter the IP address of the RADIUS Server.

■

Radius Port - Enter the port that the RADIUS service uses.

■

Radius Password - Enter the password for the RADIUS server.

■

Group Key Update Period - Specify the group key update interval

in seconds. The value should be 30 or above. Enter 0 to disable the

update.

◆ WPA-PSK/WPA2-PSK - The WPA/WPA2 authentication type based on

a pre-shared passphrase.

■

Version - You can choose the version of the WPA-PSK security from

the drop-down list. The default setting is Automatic, which can

select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared

key of WPA2) automatically based on the wireless station's

capability and request.

■

Encryption - When WPA-PSK or WPA is set as the Authentication

Type, you can select either Automatic, TKIP, or AES as the

encryption type.

OTE

If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP

encryption, you will find a notice in red, as shown in Figure 50.

Figure 50: WPA-PSK

■

PSK Passphrase - You can enter between 8 and 63 ASCII

characters, or 8 to 64 Hexadecimal characters.