User's Manual

C HAPTER 4 | Configuring the Router
Wireless
– 63 –
Figure 46: Wireless Settings (Client Router Mode)
◆ SSID - The SSID of the AP your Router is going to connect to as a
client. You can also use the survey function to select the SSID to join.
◆ BSSID - The BSSID of the AP your Router is going to connect to as a
client. You can also use the survey function to select the BSSID to join.
◆ Survey - Click the Survey button to search the AP which runs in the
current channel.
◆ Key type - This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type. (Options: None, WEP (ASCII), WEP (HEX) and
WPA-PSK/WPA2-PSK)
◆ WEP Index - Sets WEP key values. Each WEP key has an index
number. Enter key values that match the key type and length settings.
Enter 5 alphanumeric characters or 10 hexadecimal digits for 64-bit
keys, or enter 13 alphanumeric characters or 26 hexadecimal digits for
128-bit keys.
◆ Auth type - When choose WEP security, select Open System or
Shared-Key authentication type automatically based on the wireless
station's capability and request.
◆ Password - If the AP your Router is going to connect needs password,
you need to fill the password in this blank.