User's Manual

HAPTER

| Configuring the Router

Network

– 50 –

◆ Wireless Router - In this mode, the device enables multiple users to

share a single Internet connection through a DSL/cable modem. All

wireless client users share the same Internet connection through the

Ethernet WAN port as LAN port users.

◆ Wireless Client Router - In this mode, the device enables multiple

users to share a single Internet connection from a wireless Internet

service provider (WISP). The LAN port devices share the WISP

connection, where the wireless port operates as a WAN port in wireless

client mode.

NETWORK

There are three submenus under the Network menu (shown in Figure 33):

LAN,WAN and MAC Clone. Click any of them to configure the

corresponding function.

Figure 33: The Network Menu

LAN Choose menu “Network-> LAN”, you can configure the IP parameters of

the LAN on the screen as below.

Figure 34: LAN

◆ MAC Address - The physical address of the Router, as seen from the

LAN. The value cannot be changed.

◆ IP Address - Enter the IP address of your Router or reset it in dotted-

decimal notation (factory default: 192.168.2.1).

◆ Subnet Mask - An address code that determines the size of the

network. Normally use 255.255.255.0 as the subnet mask.