User's Manual

C HAPTER 4 | Configuring the Router
Operation Mode
– 49 –
Figure 31: WPS-Enter a PIN from my access point
N OTE : The default PIN code of the Router can be found on its label, or in
the WPS configuration screen, as shown in Figure 26.
Then the new device successfully connected to the network.
N OTE : The WPS LED on the Router will turn on green for five minutes when
a device has been successfully added to the network.
N OTE : The WPS function cannot be configured if the wireless function of the
Router is disabled. Make sure the wireless function is enabled before
configuring WPS.
OPERATION MODE
The Router supports two operation mode types: Wireless Router and
Wireless Client Router mode. Click Save to save your choice, which is
shown as Figure 32.
Figure 32: Operation Mode