User's Manual

C HAPTER 4 | Configuring the Router
WPS
– 47 –
Figure 28: WPS-Wireless Configuration Completed
BY PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you
can add it to the network by PIN with the following two methods.
Method One: Enter the PIN into my Router.
1. Keep the default WPS Status as Enabled and click the “Add device”
button in Figure 29, then the following screen will appear.
Figure 29: Add Device
2. Select “Enter the new device's PIN” and enter the PIN code of the
wireless adapter in the field after PIN, as shown in the figure above.
Then click Connect.
N OTE : The PIN code of the adapter is always displayed on the WPS
configuration screen.