User's Manual

HAPTER

| Configuring the Router

WPS

– 43 –

For the configuration of a new device, this example uses an SMC Wireless

Adapter.

BY PBC

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button

Configuration (PBC) method, you can add it to the network by PBC with the

following two methods.

Method One:

1. Enable the WPS function from Web management page.

2. Press the WPS button on the front panel of the Router.

Figure 20: Front Panel

3. Press and hold the WPS button of the wireless client for 2 or 3 seconds.

Figure 21: WPS Button

4. Wait until the next screen appears. Click Finish to complete the WPS

configuration.