User's Manual

HAPTER

| Quick Installation Guide

Quick Installation Guide

– 38 –

the Router without encryption. It is recommended strongly that you

choose one of following options to enable security.

■

WPA-PSK/WPA2-PSK - Select WPA based on pre-shared

passphrase.

●

PSK Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and

any letters A to Z, the length should be between 8 and 63

characters.

For Hexadecimal, the key can be made up of any numbers 0 to

9 and letters A to F, the length should be between 8 and 64

characters.

Please also note the key is case sensitive, this means that upper

and lower case keys will affect the outcome. It would also be a

good idea to write down the key and all related wireless security

settings.

■

No Change - If you chose this option, wireless security

configuration will not change.

These settings are only for basic wireless parameters. For advanced

settings, please refer to “Wireless” on page 59.

6. Click the Next button. You will then see the Finish page.

If you don’t make any changes on the Wireless page, you will see the

Finish page, as shown in Figure 15. Click the Finish button to finish

the Quick Setup.

Figure 15: Quick Setup – Finish

If there is something changed on the Wireless page, you will see the

Finish page as shown in Figure 16. Click the Reboot button to make

your wireless configuration to take effect and finish the Quick Setup.