User's Manual

– 29 –
2 CONNECTING THE ROUTER
SYSTEM REQUIREMENTS
You must meet the following minimum requirements:
◆ Broadband Internet Access Service (DSL/Cable/Ethernet)
◆ One DSL/Cable Modem that has an RJ-45 connector.
◆ PCs with working Ethernet adapters and Ethernet cables with RJ-45
connectors.
◆ TCP/IP protocol on each PC.
◆ Web browser, such as Microsoft Internet Explorer, Mozilla Firefox, or
Apple Safari.
INSTALLATION ENVIRONMENT REQUIREMENTS
◆ Place the Router in a well ventilated place far from any heater or
heating vent
◆ Avoid direct exposure to any strong light (such as sunlight)
◆ Keep at least 2 inches (5 cm) of clear space around the Router
◆ Operating Temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)
◆ Operating Humidity: 10% ~ 90% RH, Non-condensing
CONNECTING THE ROUTER
Before installing the Router, make sure your PC is successfullyconnected to
the Internet through the broadband service. If there are any problems,
first contact your ISP. After that, install the Router according to the
following steps.
CONNECTING THE
ROUTER IN ROUTER
MODE
1. Power off your PC, Cable/DSL Modem, and the Router.