User's Manual

C HAPTER 4 | Configuring the Router
IP & MAC Binding
– 103 –
To modify or delete an existing entry, follow the steps below.
1. Find the desired entry in the table.
2. Click Modify or Delete in the Modify column.
To find an existing entry, follow the steps below.
1. Click the Find button as shown in Figure 94.
2. Enter the MAC Address or IP Address.
3. Click the Find button in the page as shown in Figure 94.
Figure 94: Find IP & MAC Binding Entry
Click the “Enable All” button to make all entries enabled.
Click the “Delete All” button to delete all entries.
ARP LIST Select IP & MAC Binding->ARP List from the menu; you can view and
set ARP List in the screen, as shown in Figure 95. To manage the computer,
you could observe the computers in the LAN by checking the relationship of
MAC address and IP address on the ARP list, and you could configure the
items on the ARP list also. This page displays the ARP List; it shows all the
existing IP & MAC Binding entries as shown below.
Figure 95: ARP List
◆ MAC Address - The MAC address of the controlled computer in the
LAN.