Network Router User Manual

C
HAPTER
8
| AP Client Mode Wireless Configuration
Link Status
– 95 –
LINK STATUS
The Link Status page displays the current status of the connection to the
wireless network.
The following items are displayed on this page:
Status — The service set identifier of the wireless network and the
MAC address of the connected AP.
Extra Info — Indicates if the link is active.
Channel — Specifies the current channel in use.
Link Speed — The current transmitting and receiving rates.
Throughput — The transmitting and receiving throughputs.
Link Quality — The strength of the receive signal compared to other
interference and noise.
Signal Strength 1~3 — The current receive signal strength indication.
Noise Level — A value that indicates the amount of radio noise on the
current channel.
dBm Format — Displays the signal strength and noise values in dBm.