Network Router User Manual

HAPTER

| Network Settings

WAN Setting

– 57 –

L2TP Enables the Layer 2 Tunneling Protocol (L2TP) for implementing virtual

private networks. The service is provided in many European countries.

Figure 30: L2TP Configuration

The following items are displayed on this page:

◆ Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)

◆ User Name — Sets the L2TP user name for the WAN port.

(Default: l2tp_user; Range: 1~32 characters)

◆ Password — Sets a L2TP password for the WAN port. (Default:

l2tp_password; Range: 1~32 characters)

◆ Verify Password — Prompts you to re-enter your chosen password.

◆ Address Mode — Sets a L2TP network mode. (Default: Static)