User's Manual

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 44 –
PoE
3
Displays status of all LLDP PoE neighbors, including power
device type (PSE or PD), source of power, power priority, and
maximum required power
275
EEE Displays Energy Efficient Ethernet information advertised
through LLDP messages
276
Port Statistics Displays statistics for all connected remote devices, and
statistics for LLDP protocol packets crossing each port
277
PoE
3
Displays the status for all PoE ports, including the PD class,
requested power, allocated power, power and current used,
and PoE priority
279
MAC Table Displays dynamic and static address entries associated with
the CPU and each port
280
VLANs Virtual LANs 281
VLAN Membership Shows the current port members for all VLANs configured by
a selected software module
281
VLAN Port Shows the VLAN attributes of port members for all VLANs
configured by a selected software module which uses VLAN
management, including PVID, VLAN aware, ingress filtering,
frame type, egress filtering, and PVID
282
VCL VLAN Control List
MAC-based VLAN Displays MAC address to VLAN map entries 283
sFlow Displays information on sampled traffic, including the owner,
receiver address, remaining sampling time, and statistics for
UDP control packets and sampled traffic
284
Diagnostics 287
Ping Tests specified path using IPv4 ping 287
Ping6 Tests specified path using IPv6 ping 287
Maintenance 289
Restart Device Restarts the switch 289
Factory Defaults Restores factory default settings 290
Software
Upload Updates software on the switch with a file specified on the
management station
290
Image Select Displays information about the active and alternate (backup)
firmware images in the switch, and allows you to revert to
the alternate image
291
Configuration 292
Save Saves configuration settings to a file on the management
station
292
Upload Restores configuration settings from a file on the
management station
292
1. The Basic Configuration menu is a subset of Advanced Configuration. The following
configuration chapter is therefore structured on the Advanced Configuration menu.
2. These menus are repeated from the Basic Configuration folder.
3. These menus are only provided for PoE switches.
Table 4: Main Menu (Continued)
Menu Description Page