User's Manual

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 39 –
Network
Limit Control Configures port security limit controls, including secure
address aging; and per port security, including maximum
allowed MAC addresses, and response for security breach
83
NAS Configures global and port settings for IEEE 802.1X 85
ACL Access Control Lists 96
Ports Assigns ACL, rate limiter, and other parameters to ports 96
Rate Limiters Configures rate limit policies 98
Access Control
List
Configures ACLs based on frame type, destination MAC type,
VLAN ID, VLAN priority tag; and the action to take for
matching packets
99
DHCP Dynamic Host Configuration Protocol
Snooping Enables DHCP snooping globally; and sets the trust mode for
each port
107
Relay Configures DHCP relay information status and policy 109
IP Source Guard Filters IP traffic based on static entries in the IP Source
Guard table, or dynamic entries in the DHCP Snooping table
111
Configuration Enables IP source guard and sets the maximum number of
clients that can learned dynamically
111
Static Table Adds a static addresses to the source-guard binding table 113
ARP Inspection Address Resolution Protocol Inspection 114
Configuration Enables inspection globally, and per port 115
Static Table Adds static entries based on port, VLAN ID, and source MAC
address and IP address in ARP request packets
116
AAA Configures RADIUS authentication server, RADIUS
accounting server, and TACACS+ authentication server
settings
117
Aggregation
2
119
Static Specifies ports to group into static trunks 120
LACP Allows ports to dynamically join trunks 122
Loop Protection Detects general loopback conditions caused by hardware
problems or faulty protocol settings
124
Spanning Tree
2
126
Bridge Settings Configures global bridge settings for STP, RSTP and MSTP;
also configures edge port settings for BPDU filtering, BPDU
guard, and port error recovery
129
MSTI Mapping Maps VLANs to a specific MSTP instance 132
MSTI Priorities Configures the priority for the CIST and each MISTI 134
CIST Ports Configures interface settings for STA 135
MSTI Ports Configures interface settings for an MST instance 139
MVR Configures Multicast VLAN Registration, including global
status, MVR VLAN, port mode, and immediate leave
140
Table 4: Main Menu (Continued)
Menu Description Page