User's Manual

C HAPTER 5 | Monitoring the Switch
Displaying Information About Flow Sampling
– 284 –
◆ VLAN ID – VLAN to which ingress traffic matching the specified source
MAC address is forwarded.
◆ Port Members – The ports assigned to this VLAN.
WEB INTERFACE
1. To display MAC-based VLAN membership settings, click Monitor, VCL,
MAC-based VLAN.
2. Select a software module from the drop-down list on the right side of
the page.
Figure 149: Showing MAC-based VLAN Membership Status
DISPLAYING INFORMATION ABOUT FLOW SAMPLING
Use the sFlow Statistics page to display information on sampled traffic,
including the owner, receiver address, remaining sampling time, and
statistics for UDP control packets and sampled traffic.
PATH
Monitor, sFlow
PARAMETERS
These parameters are displayed:
Receiver Statistics
◆ Owner – This field shows the current owner of the sFlow configuration.
It assumes one of three values as follows:
■
If sFlow is currently unconfigured/unclaimed, Owner shows
<none>.
■
If sFlow is currently configured through Web, Owner shows
<Configured through local management>.
■
If sFlow is currently configured through SNMP, Owner shows a string
identifying the sFlow receiver.
◆ IP Address/Hostname – The IP address or host name of the sFlow
receiver.
◆ Timeout – The number of seconds remaining before sampling stops
and the current sFlow owner is released.
◆ Tx Successes – The number of UDP datagrams successfully sent to
the sFlow receiver.