User's Manual

HAPTER

| Monitoring the Switch

Displaying PoE Status

– 279 –

DISPLAYING POE STATUS

Use the Power Over Ethernet Status to display the status for all PoE ports,

including the PD class, requested power, allocated power, power and

current used, and PoE priority.

PATH

Monitor, PoE

PARAMETERS

These parameters are displayed:

◆ Local Port – The port on this switch which received the LLDP frame.

◆ PD class – Each PD is classified according to the maximum power it

will use. The PD classes include:

■

Class 0: Max. power 15.4 W

■

Class 1: Max. power 4.0 W

■

Class 2: Max. power 7.0 W

■

Class 3: Max. power 15.4 W

■

Class 4: Max. power 30.0 W

◆ Power Requested – Amount of power the PD wants to be reserved.

◆ Power Allocated – Amount of power the switch has allocated for the

PD.

◆ Power Used – How much power the PD is currently using.

◆ Current Used – How much current the PD is currently using

◆ Priority – The port's configured priority level (see page 168).

◆ Port Status – PoE service status for the attached device.

WEB INTERFACE

To display the status for all PoE ports, click Monitor, PoE.

Figure 145: Power over Ethernet Status