User's Manual

C HAPTER 5 | Monitoring the Switch
Displaying Information on LACP
– 256 –
◆ LACP – Shows LACP status:
■
Yes – LACP is enabled and the port link is up.
■
No – LACP is not enabled or the port link is down.
■
Backup – The port could not join the aggregation group but will
join if other port leaves. Meanwhile it's LACP status is disabled.
◆ Key – Current operational value of the key for the aggregation port.
Note that only ports with the same key can aggregate together.
◆ Aggr ID – The Aggregation ID assigned to this LAG.
◆ Partner System ID – LAG partner's system ID assigned by the LACP
protocol (i.e., its MAC address).
◆ Partner Port – The partner port connected to this local port.
WEB INTERFACE
To display LACP status for local ports this switch, click Monitor, LACP, Port
Status.
Figure 124: LACP Port Status
DISPLAYING LACP
PORT STATISTICS
Use the LACP Port Statistics page to display statistics on LACP control
packets crossing on each port.
PATH
Monitor, LACP, Port Statistics
PARAMETERS
These parameters are displayed:
◆ Port – Port Identifier.
◆ LACP Transmitted – The number of LACP frames sent from each port.
◆ LACP Received – The number of LACP frames received at each port.
◆ Discarded – The number of unknown or illegal LACP frames that have
been discarded at each port.