User's Manual

C HAPTER 5 | Monitoring the Switch
Displaying Information About Security Settings
– 240 –
the client will remain in the unauthenticated state for Hold Time
seconds (see page 234).
◆ Last Authentication – Shows the date and time of the last
authentication of the client (successful as well as unsuccessful).
WEB INTERFACE
To display port Statistics for 802.1X or Remote Authentication Service:
1. Click Monitor, Security, Network, NAS, Port.
2. Select a port from the scroll-down list.
Figure 111: NAS Statistics for Specified Port
DISPLAYING ACL
STATUS
Use the ACL Status page to show the status for different security modules
which use ACL filtering, including ingress port, frame type, and forwarding
action. Each row describes a defined ACE (see page 96).
PATH
Monitor, Security, Network, ACL Status
PARAMETERS
These parameters are displayed:
◆ User – Indicates the ACL user (see "Configuring User Privilege Levels"
on page 60 for a list of software modules).
◆ Ingress Port – Indicates the ingress port to which the ACE applies.
Possible values are:
■
Any: The ACE will match any ingress port.
■
Policy: The ACE will match ingress ports with a specific policy.