User's Manual

C HAPTER 4 | Configuring the Switch
Configuring Remote Port Mirroring
– 213 –
WEB INTERFACE
To configure remote port mirroring for an RSPAN source switch:
1. Click Basic/Advanced Configuration, Mirroring & RSPAN.
2. Set the Mode to Enabled, and the Type to Source.
3. Set the Remote VLAN ID, the Reflector port connecting to the RSPAN
VLAN, the type of traffic to mirror from the Source ports, and the
intermediate ports through which all mirrored traffic will be forwarded
to other switches.
4. Click Save.
Figure 92: Mirror Configuration (Source)