User's Manual

C HAPTER 4 | Configuring the Switch
Multicast VLAN Registration
– 144 –
source ports, specify whether or not control frames are tagged with the
MVR ID, set the priority and last member query interval.
4. Optionally enable immediate leave on any receiver port to which only
one subscriber is attached.
5. Click Save.
Figure 54: Configuring General MVR Settings
CONFIGURING MVR
C
HANNEL SETTINGS
Use the MVR Channel Configuration page to view dynamic multicast group
bindings for a multicast VLAN, or to configure static bindings for a multicast
VLAN.
PATH
C
OMMAND USAGE
◆ Use the Navigate Channel Setting fields to specify the MVR VLAN and
number of entries to display per page. Then use the arrow keys to scroll
through the list of associated channels.
◆ Static bindings should only be used to receive long-term multicast
streams associated with a stable set of hosts
◆ Only IGMP version 2 or 3 hosts can issue multicast join or leave
messages. If MVR must be configured for an IGMP version 1 host, the
multicast groups must be statically assigned using this configuration
page.
Advanced Configuration, MVR ( MVR Channel Configuration)