User's Manual

HAPTER

| Monitoring the Switch

Displaying the MAC Address Table

– 280 –

DISPLAYING THE MAC ADDRESS TABLE

Use the MAC Address Table to display dynamic and static address entries

associated with the CPU and each port.

PATH

Monitor, MAC Address Table

PARAMETERS

These parameters are displayed:

◆ Start from VLAN # and MAC address # with # entries per page –

These input fields allow you to select the starting point in the table.

◆ Type – Indicates whether the entry is static or dynamic. Dynamic MAC

addresses are learned by monitoring the source address for traffic

entering the switch. To configure static addresses, refer to "Configuring

the MAC Address Table" on page 171.

◆ VLAN – The VLAN containing this entry.

◆ MAC Address – Physical address associated with this interface.

◆ Port Members – The ports associated with this entry.

WEB INTERFACE

To display the address table, click Monitor, MAC Address Table.

Figure 146: MAC Address Table