Manualshelf

User's Manual

ManualsBrandsSMC Networks ManualsSwitchSMC Networks SMCGS1601/SMCGS2401
21222324252627282930
C
HAPTER
3
| Installing the Switch
Installation
– 22 –
5. Connect the switch to a power source with the provided power cord. See
“Powering On” on page 25.
RACK INSTALLATION
To install the switch in an EIA standard-sized, 19-inch rack, follow the
instructions described below:
1. Secure the supplied rack-mounting brackets to each side of the switch with
supplied screws, as illustrated in the following figure.
Figure 5: Attaching Brackets
2. Use suitable screws (not provided) to secure the brackets to the rack, as
illustrated in the following figure.
C
AUTION
:
Avoid placing anything heavy on the switch.