User's Manual

C HAPTER 3 | Installing the Switch
Installation
– 24 –
CONNECTING TO A GROUNDING BAR
When the switch is installed in an equipment room, where a grounding bar is
available, you are recommended to connect the switch to the grounding bar as
shown in the following figure.
Figure 7: Connecting to a Grounding Bar
CONNECTING TO GROUND THROUGH THE POWER SUPPLY
If the switch is installed in a normal environment, it can be grounded through
the PE (Protective Earth) wire of the AC power supply, as shown in the following
figure.
N OTE : The grounding bar and grounding cable are not provided with the
product.
100-240V~ 50/60Hz 0.3A
2
1
3
4
1 Switch (Rear Panel)
2 Grounding Terminal
3 Ground Cable
4 Grounding Bar