Gigabit Ethernet Switch Management Guide

A DDRESS T ABLE C OMMANDS
4-200
Address Table Commands
These commands are used to configure the address table for filtering
specified addresses, displaying current entries, clearing the table, or setting
the aging time.
Console#show lacp 1 sysid
Channel group System Priority System MAC Address
-------------------------------------------------------------------
1 32768 00-30-F1-8F-2C-A7
2 32768 00-30-F1-8F-2C-A7
3 32768 00-30-F1-8F-2C-A7
4 32768 00-30-F1-8F-2C-A7
5 32768 00-30-F1-8F-2C-A7
6 32768 00-30-F1-8F-2C-A7
Console#
Field Description
Channel group A link aggregation group configured on this switch.
System Priority* LACP system priority for this channel group.
System MAC Address* System MAC address.
* The LACP system priority and system MAC address are concatenated to form the LAG system ID .
Table 4-36. Adress Table Commands
Command Function Mode Page
mac-address-table
static
Maps a static address to a port in
a VLAN
GC 4-201
clear
mac-address-table dynamic
Removes any learned entries
from the forwarding database
PE 4-202
show mac-address-table Displays entries in the
bridge-forwarding database
PE 4-202
mac-address-table aging-time Sets the aging time of the address
table
GC 4-203
show mac-address-table
aging-time
Shows the aging time for the
address table
PE 4-204