Gigabit Ethernet Switch Management Guide

I NTERFACE C OMMANDS
4-182
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or
disabled; if enabled it also shows the threshold level
(page 4-176).
Lacp status Shows if Link Aggregation Control Protocol has been
enabled or disabled (page 4-190).
Ingress/Egress rate
limit
Shows if rate limiting is enabled, and the current rate limit.
(4-186).
VLAN membership
mode
Indicates membership mode as Trunk or Hybrid
(page 4-236).
Ingress rule Shows if ingress filtering is enabled or disabled (page 4-238).
Acceptable frame type Shows if acceptable VLAN frames include all types or
tagged frames only (page 4-237).
Native VLAN Indicates the default Port VLAN ID (page 4-239).
Priority for untagged
traffic
Indicates the default priority for untagged frames
(page 4-255).
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-252).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 4-240).
Forbidden Vlan Shows the VLANs this interface can not dynamically join
via GVRP (page 4-241).