Gigabit Ethernet Switch Management Guide

SNMP C OMMANDS
4-151
snmp contact
This command sets the system contact string. Use the no form to remove
the system contact information.
Syntax
snmp contact string
no snmp contact
string - String that describes the system contact information.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp location (4-151)
snmp location
This command sets the system location string. Use the no form to remove
the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Console(config)#snmp contact Paul
Console(config)#