Gigabit Ethernet Switch Management Guide

A CCESS C ONTROL L IST C OMMANDS
4-117
permit, deny Filters packets meeting the specified
criteria, including source and
destination IP address, TCP/UDP port
number, protocol type, and TCP
control code
EXT-ACL 4-120
show ip access-list Displays the rules for configured IP
ACLs
PE 4-123
access-list ip
mask-precedence
Accesses the IP Mask mode used to
configure access control mask
GC 4-123
mask Sets a precedence mask for the ACL
rules
IP-Mask 4-125
show access-list ip
mask-precedence
Shows the ingress or egress rule masks
for IP ACLs
PE 4-128
ip access-group Adds a port to an IP ACL IC 4-129
show ip
access-group
Shows port assignments for IP ACLs PE 4-129
map access-list ip Sets the CoS value and corresponding
output queue for packets matching an
ACL rule
IC 4-130
show map
access-list ip
Shows CoS value mapped to an access
list for an interface
PE 4-132
match access-list ip Changes the 802.1p priority, IP
Precedence, or DSCP Priority of a
frame matching the defined rule (i.e.,
also called packet marking)
IC 4-133
show marking Displays the current configuration for
packet marking
PE 4-134
Table 4-27. IP ACL Commands
Command Function Mode Page