Gigabit Ethernet Switch Management Guide

A UTHENTICATION C OMMANDS
4-111
Default
30 seconds
Command Mode
Global Configuration
Example
show dot1x
This command shows general port authentication related settings on the
switch or a specific interface.
Syntax
show dot1x [statistics] [interface interface]
interface
ethernet unit/port
- unit - This is device 1.
- port - Port number.
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
• Global 802.1X Parameters – Displays the global port access control
parameters that can be configured for this switch as described in the
preceding pages, including reauth-enabled (page 4-109),
reauth-period (page 4-110), quiet-period (page 4-109), tx-period
(page 4-110), and max-req (page 4-106). It also displays the
following global parameters which are set to a fixed value, including
the following items:
- supp-timeout– Supplicant timeout.
- server-timeout– Server timeout.
- reauth-max– Maximum number of reauthentication attempts.
Console(config)#dot1x timeout tx-period 300
Console(config)#