Gigabit Ethernet Switch Management Guide

VLAN C ONFIGURATION
3-157
Web – Click VLAN, 802.1Q VLAN, Port Configuration or VLAN Trunk
Configuration. Fill in the required settings for each interface, click Apply.
Figure 3-65. Configuring VLAN Ports
CLI – This example sets port 3 to accept only tagged frames, assigns
PVID 3 as the native VLAN ID, enables GVRP, sets the GARP timers,
and then sets the switchport mode to hybrid.
Console(config)#interface ethernet 1/3 3-168
Console(config-if)#switchport acceptable-frame-types tagged 3-237
Console(config-if)#switchport ingress-filtering 3-238
Console(config-if)#switchport native vlan 3 3-239
Console(config-if)#switchport gvrp 3-252
Console(config-if)#garp timer join 20 3-253
Console(config-if)#garp timer leave 90
Console(config-if)#garp timer leaveall 2000
Console(config-if)#switchport mode hybrid 3-236
Console(config-if)#