Gigabit Ethernet Switch Management Guide

A DDRESS T ABLE S ETTINGS
3-115
CLI – This example also displays the address table entries for port 1.
Changing the Aging Time
You can set the aging time for entries in the dynamic address table.
Command Attributes
Aging Time – The time after which a learned entry is discarded.
(Range: 10-1000000 seconds; Default: 300 seconds)
Web – Click Address Table, Address Aging. Specify the new aging time,
click Apply.
Figure 3-51. Setting the Aging Time
CLI – This example sets the aging time to 400 seconds.
Console#show mac-address-table interface ethernet 1/1 3-202
Interface Mac Address Vlan Type
--------- ----------------- ---- -----------------
Eth 1/ 1 00-E0-29-94-34-DE 1 Permanent
Eth 1/ 1 00-20-9C-23-CD-60 2 Learned
Console#
Console(config)#mac-address-table aging-time 400 3-203
Console(config)#