Gigabit Ethernet Switch Management Guide

F ILTERING M ANAGEMENT A CCESS
3-79
Command Attributes
• Web IP Filter – Configures IP address(es) for the web group.
• SNMP IP Filter – Configures IP address(es) for the SNMP group.
• Telnet IP Filter – Configures IP address(es) for the Telnet group.
• IP Filter List – IP address which are allowed management access to this
interface.
• Start IP Address – A single IP address, or the starting address of a
range.
• End IP Address – The end address of a range.
Web – Click Security, IP Filter. Enter the addresses that are allowed
management access to an interface, and click Add IP Filtering Entry.
Figure 3-35. Filtering Management Access
CLI – This example restricts management access for Telnet clients.
Console(config)#management telnet-client 192.168.1.19 3-38
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console#