Gigabit Ethernet Switch Management Guide

C ONFIGURING THE S WITCH
3-72
subnet), or “IP” to specify a range of addresses. (Options: Any, Host,
IP; Default: Any)
• Src/Dst IP Bitmask – Source or destination address of rule must
match this bitmask. (See the description for SubMask on page 3-63.)
• Protocol Bitmask – Check the protocol field.
• Service Type – Check the rule for the specified priority type.
(Options: Precedence, TOS, DSCP; Default: TOS)
• Src/Dst Port Bitmask – Protocol port of rule must match this
bitmask. (Range: 0-65535)
• Control Bitmask – Control flags of rule must match this bitmask.
(Range: 0-63)