Gigabit Ethernet Switch Management Guide

IP I NTERFACE C OMMANDS
-119
Syntax
ip default-gateway gateway
no ip default-gateway
gateway - IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
• The gateway specified in this command is only valid if routing is
disabled with the no ip routing command. If IP routing is disabled,
you must define a gateway if the target device is located in a different
subnet.
• If routing is enabled, you must define the gateway with the ip route
command.
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (3-120)
ip routing (3-127)
ip route (3-128)
show ip interface
This command displays the settings of an IP interface.
Default Setting
All interfaces
Command Mode
Privileged Exec
Console(config)#ip default-gateway 10.1.1.254
Console(config)#