Gigabit Ethernet Switch Management Guide

OMMAND

INE

NTERFACE

4-156

• hex - The hexadecimal value.

Default Setting

None

Command Mode

Interface Configuration (VLAN)

Command Usage

This command is used to include a client identifier in all

communications with the DHCP server. The identifier type depends on

the requirements of your DHCP server.

Example

Related Commands

ip dhcp restart client (3-156)

ip dhcp restart client

This command submits a BOOTP or DHCP client request.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

• This command issues a BOOTP or DHCP client request for any IP

interface that has been set to BOOTP or DHCP mode via the ip

address command.

• DHCP requires the server to reassign the client’s last address if

available.

Console(config)#interface vlan 2

Console(config-if)#ip dhcp client-identifier hex 00-00-e8-66-65-72

Console(config-if)#