Gigabit Ethernet Switch Management Guide

W EB I NTERFACE
3-3
If this is your first time to access the management agent, you should
define a new Administrator password, record it and put it in a safe
place. From the Main Menu, select Security and enter a new password
for the Administrator. Note that passwords can consist of up to 11
alphanumeric characters and are not case sensitive.
Note: Based on the default configuration, a user is allowed three
attempts to enter the correct password; on the third failed
attempt the current connection is terminated. See “Console
Login Configuration” on page 2-22.
Configuration Options
Configurable parameters have a dialog box or a drop-down list. Once
a configuration change has been made on a page, be sure to click on
the “Apply” button at the bottom of the page to confirm the new
setting. The following table summarizes the Web page configuration
buttons.
Notes: 1. To ensure proper screen refresh, be sure that Internet
Explorer 5.0 is configured as follows: Under the menu
“Tools / Internet Options / General / Temporary
Internet Files / Settings,” the setting for item “Check for
newer versions of stored pages” should be “Every visit to
the page.”
2. When using Internet Explorer 5.0, you may have to
manually refresh the screen after making configuration
changes by pressing the browser’s refresh button.
Web Page Configuration Buttons
Button Action
Apply Sets specified values in the SNMP agent.
Revert Cancels specified values prior to pressing the “Apply”
button.
Refresh Immediately updates values from the SNMP agent.