Gigabit Ethernet Switch Management Guide

C ONSOLE I NTERFACE
2-65
GVRP Status
2
Enables or disables GVRP for this port. When
disabled, any GVRP packets received on this port
will be discarded and no GVRP registrations will
be propagated from other ports.
Note that GVRP must be enabled for the switch
before this setting can take effect. (See Switch
Configuration Menu / Extended Bridge
Configuration.)
GVRP Failed
Registrations
2
The total number of failed GVRP registrations, for
any reason, on this port.
GVRP Last PDU
Origin
2
The Source MAC Address of the last GVRP
message received on this port.
1. This control does not affect VLAN independent BPDU frames, such as
GVRP or STP. However, it does affect VLAN dependent BPDU
frames, such as GMRP.
2. GVRP is not available for the current firmware release.
Parameter Description