Gigabit Ethernet Switch Management Guide

C ONSOLE I NTERFACE
2-64
802.1Q VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q
VLAN features.
SMC TigerSwitch 1000 Local Management -- SMC8606T
< 802.1Q VLAN Port Configuration >
Port PVID Acceptable Ingress GVRP GVRP Failed GVRP Last
Frame Type Filtering Status Registrations PDU Origin
--------------------------------------------------------------------------
1 1 All FALSE DISABLED 0 00-00-00-00-00-00
2 1 All FALSE DISABLED 0 00-00-00-00-00-00
3 1 All FALSE DISABLED 0 00-00-00-00-00-00
4 1 All FALSE DISABLED 0 00-00-00-00-00-00
5 1 All FALSE DISABLED 0 00-00-00-00-00-00
6 1 All FALSE DISABLED 0 00-00-00-00-00-00
7 1 All FALSE DISABLED 0 00-00-00-00-00-00
8 1 All FALSE DISABLED 0 00-00-00-00-00-00
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
PVID The VLAN ID assigned to untagged frames
received on this port. Use the PVID to assign ports
to the same untagged VLAN.
Acceptable Frame
Type
1
This switch accepts “All” frame types, including
VLAN tagged or VLAN untagged frames. Note that
all VLAN untagged frames received on this port are
assigned to the PVID for this port.
Ingress Filtering
1
If set to “True,” incoming frames for VLANs which
do not include this port in their member set will be
discarded at the inbound port.