Gigabit Ethernet Switch Management Guide

C ONSOLE I NTERFACE
2-55
Port Priority Configuration
The default priority for all ingress ports is zero. Therefore, any
inbound frames that do not have priority tags will be placed in the
low priority output queue. Default priority is only used to
determine the output queue for the current port; no priority tag is
actually added to the frame. You can use the 802.1P Port Priority
Configuration menu to adjust default priority for any port as
shown below:
SMC TigerSwitch 1000 Local Management -- SMC8606T
< 802.1P Port Priority Configuration >
Port Default Ingress Number of Egress
User Priority Traffic Class
-----------------------------------------------
1 0 2
2 0 2
3 0 2
4 0 2
5 0 2
6 0 2
7 0 2
8 0 2
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Port Numeric identifier for switch port.
Default Ingress
User Priority
Default priority can be set to any value from 0~7,
where 0~3 specifies the low priority queue and
4~7 specifies the high priority queue.
Number of Egress
Traffic Classes
Indicates that this switch supports two priority
output queues.