Gigabit Ethernet Switch Management Guide

C ONSOLE I NTERFACE
2-53
Static Entry
Individual Port
Indicates that the switch allows static filtering for
unicast and multicast addresses. (Refer to Network
Monitor Menu / Static Unicast Address Table
Configuration and Static Multicast Address Table
Configuration.)
VLAN Learning This switch uses Shared VLAN Learning (SVL),
whereby all ports share the same VLAN filtering
database.
Configurable
PVID Tagging
Indicates that the switch allows you to override the
default PVID setting (Port VLAN ID used in frame
tags) and its egress status (VLAN-Tagged or
Untagged) on each port. (Refer to 802.1Q VLAN
Port Configuration.)
Local VLAN
Capable
This switch does not support multiple local
bridges (that is, multiple Spanning Trees).
Bridge Settings
Traffic Class* Multiple traffic classes are supported by this switch
as indicated under Bridge Capabilities. However,
you can disable this function by setting this
parameter to False.
GMRP* GARP Multicast Registration Protocol (GMRP)
allows network devices to register endstations
with multicast groups.
The Internet Group Management Protocol (IGMP)
is currently used by this switch to provide
automatic multicast filtering.
GVRP* GARP VLAN Registration Protocol (GVRP) defines
a way for switches to exchange VLAN information
in order to register necessary VLAN members on
ports across the network. This function should be
enabled to permit VLANs groups which extend
beyond the local switch.
* Not implemented in the current firmware release.
Parameter Description