Gigabit Ethernet Switch Management Guide

ONSOLE

NTERFACE

2-46

You can use the Port Trunking Configuration screen to set up port

trunks as shown

below. Remember that you must “Enable” a new

configuration before it will take effect.

SMC TigerSwitch 1000 Local Management -- SMC8606T

< Port Trunking Configuration >

Trunk ID Status Member List

1 2 3 4

--------- -------- ----------- ----------- ----------- -----------

-- -------- Port : -- Port : -- Port : -- Port : --

Trunk ID : 1 Trunk ID : 1 Member Port : 1

[Show] [More]

[Enable] [Disable] [Add] [Delete]

<OK>

Use <TAB> or arrow keys to move, other keys to make changes.

Parameter Description

Trunk ID Configure up to four trunks per switch (ID of 1~4).

Port Select from 2~4 ports per trunk.

[Show] Displays trunk settings, where the first trunk listed

is specified by “Sorted by Trunk ID.”

[More] Scrolls through the list of configured trunks.

[Enable] [Disable] Enables/disables the selected trunk.