Gigabit Ethernet Switch Management Guide

C ONSOLE I NTERFACE
2-34
Configuring Bridge STA
The following figure and table describe Bridge STA configuration.
SMC TigerSwitch 1000 Local Management -- SMC8606T
< Spanning Tree Bridge Configuration >
Spanning Tree Protocol : On
Bridge Priority : 32768
Hello Time (in seconds) : 2
Max Age (in seconds) : 20
Forward Delay (in seconds) : 15
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter Default Description
Spanning
Tree
Protocol
On Enable this parameter to participate in an
STA-compliant network.
Priority 32,768 Device priority is used in selecting the root
device, root port, and designated port. The
device with the highest priority becomes the
STA root device. However, if all devices
have the same priority, the device with the
lowest MAC address will then become the
root device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value,
the higher the priority.